< Back to the list

07/04/14

Bearings

For longer life and maximum performance, your bearings should be properly cleaned
and lubricated. Check with an authorized  Rollerblade® dealer  to find out if your bearings can be cleaned.
To clean bearings, you will need:

- A needle and a small knife or flat head screwdriver (be careful to avoid any injuries).
- A small glass or container, a cleaning agent for bearings and a toothbrush to remove excess dirt.
- A dry cloth or paper towels.
- A lubricant (gel or grease depending on the type of bearings on your skates) Check with an authorized Rollerblade® dealer to determine your bearing type.

CAUTION:
When using solvents, mineral oils or any other inflammable or harmful substances, do not directly breath in the vapors, work in a properly ventilated area and wear gloves to avoid any skin contact

 

FOLLOW US

@ROLLERBLADE

SKATE SMART:

KNOW YOUR SKILL LEVEL AND SKATING CONDITIONS

FOLLOW US ON

ROLLERBLADE IS A DIVISION OF TECNICA GROUP S.P.A.
Company subordinate to the management and coordination of Sintesi Holding S.r.L.
Based in Giavera del Montello (TV) - Via Fante d’Italia n. 56 | Share Capital € 25,000,000.00 fully paid up
Company registered under no. 78175 R.E.A. of Treviso. | Business Register and Tax Code 00195810262