Select your country

If your country is not in the list, choose international


North and South America

USA ‹ change
< Back to the list



For longer life and maximum performance, your bearings should be properly cleaned
and lubricated. Check with an authorized  Rollerblade® dealer  to find out if your bearings can be cleaned.
To clean bearings, you will need:

- A needle and a small knife or flat head screwdriver (be careful to avoid any injuries).
- A small glass or container, a cleaning agent for bearings and a toothbrush to remove excess dirt.
- A dry cloth or paper towels.
- A lubricant (gel or grease depending on the type of bearings on your skates) Check with an authorized Rollerblade® dealer to determine your bearing type.

When using solvents, mineral oils or any other inflammable or harmful substances, do not directly breath in the vapors, work in a properly ventilated area and wear gloves to avoid any skin contact